Frequently Asked Question

Storage: Choose a RAID Type
Last Updated 7 years ago

Choose a RAID Type

RAID (Redundant Array of Independent Disks) is a data storage technology that allows multiple drives to be combined into a single storage space. There are different types of RAID, each providing different levels of performance, storage capacity, and reliability.

This article provides a brief overview of RAID types supported by Synology NAS, including implementation requirements as well as advantages and disadvantages.


Support RAID Types

This table provides a brief overview of different RAID types supported by Synology NAS, including storage capacity, the minimum number of drives required for the RAID type, and the number of drive failures that can be tolerated before data loss occurs.

Volume Type Number of HDD Tolerable Drive Failures Description Volume Capacity
SHR 1 0
  • Optimizes volume size when combining drives of different sizes.
  • Provides data redundancy if the volume is composed of two or more drives.
  • Recommended for beginner users.
1 x (HDD size)
2-3 1 Optimized by the system.
≧4 1-2
Basic 1 0
  • Composed of one drive as an independent unit.
  • Does not provide data redundancy.
1 x (HDD size)
JBOD ≧1 0
  • Combines a collection of drives into a single storage space, with capacity equal to the sum of all drives' capacity.
  • Does not provide data redundancy.
Sum of all HDD sizes
RAID 0 ≧2 0
  • Features "striping," a process of dividing data into blocks and spreading the data blocks across several drives in order to enhance performance.
  • Does not provide data redundancy.
Sum of all HDD sizes
RAID 1 2 1
  • Writes identical data to both drives simultaneously.
  • Provides data redundancy.
Smallest HDD size
3 2
4 3
RAID 5 ≧3 1
  • Implements block-level striping with parity data distributed across all member drives, thus providing data redundancy more efficiently than RAID 1.
(N – 1) x (Smallest HDD size)
RAID 6 ≧4 2
  • Implements two layers of data parity to store redundant data equal to the size of two drives, providing a greater degree of data redundancy than RAID 5.
(N – 2) x (Smallest HDD size)
RAID 10 ≧4
(even number)
Half of the total HDD
  • Provides the performance of RAID 0 and data protection level of RAID 1, combining drives into groups of two in which data is mirrored.
(N / 2) x (Smallest HDD size)
Note:
  • RAID types except for "Basic" are only available on certain models depending on the number of drive slots and number of installed drives.
  • "N" represents the total number of drives within the volume.

Synology Hybrid RAID (SHR)

Synology Hybrid RAID (SHR) is an automated RAID management system, designed to simplify storage management and meet the needs of new users who are unfamiliar with RAID types.

SHR can combine different sized drives to create a storage volume with optimized capacity and performance, wasting less drive space and providing a more flexible storage solution. When sufficient drives are included, SHR allows for 1- or 2-disk redundancy - meaning the SHR Volume can suffer up to one or two failed drives without experiencing data loss.


RAID 0

RAID 0 combines two or more drives to increase performance and capacity, but provides no fault tolerance. A single drive failure will result in the loss of all data on the array. RAID 0 is useful for non-critical systems where a high price/performance balance is required.

RAID 1

RAID 1 is most often implemented with two drives. Data on the drives are mirrored, providing fault tolerance in case of drive failure. Read performance is increased while write performance will be similar to a single drive. A single drive failure can be sustained without data loss. RAID 1 is often used when fault tolerance is key, while space and performance are not critical requirements.

RAID 5

RAID 5 provides fault tolerance and increased read performance. A minimum of three drives is required. RAID 5 can sustain the loss of a single drive. In the event of a drive failure, data from the failed drive is reconstructed from parity striped across the remaining drives. As a result, both read and write performance is severely impacted while a RAID 5 array is in a degraded state. RAID 5 is ideal when space and cost are more important than performance.

RAID 6

RAID 6 is similar to RAID 5, except it provides another layer of striping and can sustain two drive failures. A minimum of four drives is required. The performance of RAID 6 is lower than that of RAID 5 due to this additional fault tolerance. RAID 6 becomes attractive when space and cost are important and sustaining multiple drive failures is required.

RAID 10

RAID 10 combines the benefits of RAID 1 and RAID 0. Read and write performance is increased, but only half of the total space is available for data storage. Four or more drives are required making the cost relatively high, but the performance is great while providing fault tolerance at the same time. In fact, a RAID 10 can sustain multiple drive failures -- provided the failures are not within the same sub group. RAID 10 is ideal for applications with a high input/output demand such as database servers.



ZGTLv160707

Please Wait!

Please wait... it will take a second!