ACE Peripherals | Support Ticket System

Frequently Asked Question

MJ: How to monitor multi-device in WAN?
Last Updated 5 years ago

Suitable for MJPG cameras: FI8903W, FI8904W, FI8905W, FI8907W, FI8908W, FI8909W, FI8910W, FI8918W, FI8919W.

MJPG camera supports to monitor up to 9 IP cameras through internet simultaneously. Please make sure you can access every camera in WAN/Internet first. And then take the following steps as a reference to set multi-device in WAN.

Step 1:
Click For Administrator --> Multi-Device Settings.
Click The 2nd Device and then enter Alias, Host, Http Port, User and Password of the camera which is needed to add.
Host is the hostname or internet IP address of the second camera.

Click Add to add camera and then click Submit to save the settings.

You can add more cameras in the same way. Eg: I add three cameras (Foscam Demo, foscamdemo3, foscamdemo1) here.

Step 2:
Access camera with hostname or internet IP address.
Go to For Visitor and then click four windows. You will see all the four cameras. 
The indicators on Device Status are green mean camera are added successfully.

Please Wait!

Please wait... it will take a second!