ACE Peripherals | Support Ticket System

Frequently Asked Question

General: How to reset your QNAP NAS?
Last Updated 3 years ago

Please press the reset button for 3 seconds, then a beep sound will be heard. The following settings will be reset to default:

  • System administration password: admin.
  • TCP/IP configuration: Obtain IP address settings automatically via DHCP.
  • TCP/IP configuration: Disable Jumbo Frame.
  • TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port trunking mode will be reset to "Active Backup (Failover)".
  • System port: 8080 (system service port).
  • Security level: Low (Allow all connections).
  • LCD panel password: (blank); This feature is only provided by the NAS models with LCD panels. Please visit for details.
  • VLAN will be disabled.
  • Service binding: All NAS services run on all available network interfaces.
This reset function only affect above settings. Your data will be left intact.

Please check the following for more detail:


Please Wait!

Please wait... it will take a second!